ENERGY MANAGEMENT & STORAGE LAB
YEUNGNAM UNIVERSITY

International

  • home
  • PUBLICATION
  • International
2020
25 Experimental investigation of the dependence of the thermoelectric performance of carbon nanotubes/polymer nanocomposite…
Kang, S.-W., Kim, S., Cho, C., and Choi, K.
Functional Composites and Structures, 2(3), pp. 035001 - 1 - 9, 2020
LINK
24 Three-dimensional nanoflower–like hierarchical array of multifunctional copper cobaltate electrode as efficient electroc…
Yadav, A.A., Hunge, Y.M., Kulkarni, S.B., Terashima, C., and Kang, S.-W.
Journal of Colloid and Interface Science (2019 I.F. = 7.489), 576, pp. 476 - 485, 2020
LINK
23 Enhanced thermal performance of lithium nitrate phase change material by porous copper oxide nanowires integrated on fol…
Son, H.W., Heu C.S., Lee, H.S., Kim, S.H., Mok, J.Y., Kang, S.-W., and Kim, D.R.
Chemical Engineering Journal (2019 I.F. = 10.652), 391, pp. 123613 - 1 - 10, 2020
LINK
22 Effects of dispersants and defoamers on the enhanced electrical performance by carbon nanotube networks embedded in ceme…
Choi, K., Min, Y.K., Chung, W., Lee, S.-E., and Kang, S.-W.
Composite Structures (2019 I.F. = 5.138), 243, pp. 112193 - 1 - 7, 2020
LINK
21 Layer-by-layer assembled phase change composite with paraffin for heat spreader with enhanced cooling
Heu, C.S., Kim, S.H., Lee, H.S., Son, H.W., Mok, J.Y., Kang, S.-W., and Kim, D.R.
Energy Conversion and Management (2019 I.F. = 8.208), 204, pp. 112287 - 1 - 9, 2020
LINK
20 Numerical modeling and experimental validation of a phase change material-based compact cascade cooling system for enhan…
Kim, S.-H., Heu, C.S., Kim, D.R., and Kang, S.-W.
Applied Thermal Engineering (2019 I.F. = 4.725), 164C, pp. 114470 - 1 - 9, 2020
LINK
2018
19 In-situ characterization of enhanced thermal performance by periodic nanostructures on the surface of a microchannel
Yu, J., Kang, S.-W., Kwon, T.-S., and Banerjee, D.
International Journal of Heat and Mass Transfer (2017 I.F. = 3.891), 124, pp. 414 - 422, 2018
LINK
18 Spray-drying assisted synthesis of a Li4Ti5O12/C composite for high rate performance lithium ion batteries
Park, J.-H., Kang, S.-W., Kwon, T.-S., and Park, H.S.
Ceramics International (2017 I.F. = 3.057), 44(3), pp. 2683 - 2690, 2018
LINK
2017
17 Competition between ionic adsorption and desorption on electrochemical double layer capacitor electrodes in acetonitrile…
Park, S., Kang, S.-W., and Kim, K.
Journal of Power Sources, 372, pp. 8 - 15, 2017
LINK
16 Design and electro-thermo-mechanical behavior analysis of Au/Si3N4 bimorph microcantilevers for static mode sensing
Kang, S.-W., Fragala, J., Kim, S.-H., and Banerjee, D.
Sensors, 17(11), pp. 2510 - 1 - 14, 2017
LINK
15 Microwave synthesis of SnO2 nanocrystals decorated on the layer-by-layer reduced graphene oxide for an application into …
Suh, D.H., Park, S.K., Nakhanivej, P., Kang, S.-W., and Park, H.S.
Journal of Alloys and Compounds, 702, pp. 636 - 643, 2017
LINK
2016
14 Experimental validation of numerical predictions for forced convective heat transfer of nanofluids in a microchannel
Yu, J., Kang, S.-W., Jeong, R.-G., and Banerjee, D.
International Journal of Heat and Fluid Flow, 62, pp. 203 - 212, 2016
LINK
13 All-solid-state flexible micro supercapacitors based on cobalt hydroxide and reduced graphene oxide electrodes
Lee, S.C., Patil, U.M., Kim, S.J., Ahn, S., Kang, S.-W., and Jun, S.C.
RSC Advances, 6(50), pp. 43844 - 43854, 2016
LINK
12 Fabrication of ultra-high energy and power asymmetric supercapacitors based on hybrid 2D MoS2/graphene oxide composite e…
Patil, U.M., Nam, M.S., Kang, S.-W., Sohn, J.S., Sim, H.B., Kang, S., and Jun, S.C.
RSC Advances, 6(49), pp. 43261 - 43271, 2016
LINK
2015~
11 Impact of different nanostructures of a PEDOT decorated 3D multilayered graphene foam by chemical methods on supercapaci…
Sohn, J.S., Patil, U.M., Kang, S.-W., Kang, S., and Jun, S.C.
RSC Advances, 5(130), pp. 107864 - 107871, 2015
LINK
10 Vehicle position estimation based on magnetic markers: accuracy by compensation of time delays
Byun, Y.-S., Jeong, R.-G., and Kang, S.-W.
Sensors, 15(11), pp. 28807 - 28825, 2015
LINK
9 Numerical modeling and experimental validation by calorimetric detection of energetic materials using thermal bimorph mi…
Kang, S.-W., Fragala, J., and Banerjee, D.
Sensors, 15(9), pp. 21785 - 21806, 2015
LINK
8 Development of integrated sensor module for a non-invasive respiratory monitoring system
Kang, S.-W. and Chang, K.-S.
Review of Scientific Instruments, 84(9), pp. 095004 - 1 - 9, 2013
LINK
7 Experimental validation of numerical study on thermoelectric-based heating in an integrated centrifugal microfluidic pla…
Amasia, M., Kang, S.-W., Banerjee, D., and Madou, M.
Biomicrofluidics, 7(1), pp. 014016 - 1 - 13, 2013
LINK
6 Experimental study of forced convective heat transfer of nanofluids in a microchannel
Anoop, K., Sadr, R., Yu, J., Kang, S.-W., Jeon, S., and Banerjee, D.
International Communications in Heat and Mass Transfer, 39(9), pp. 1325 - 1330, 2012
LINK
5 Heat transfer measurement for flow of nanofluids in microchannels using temperature nano-sensors
Yu, J., Kang, S.-W., Jeon, S., and Banerjee, D.
Frontiers in Heat and Mass Transfer (FHMT), 3(1), pp. 013004 - 1 - 9, 2012
LINK
4 Lifshitz localization-based reconfigurable photonic crystals
De Los Santos, H.J., Kang, S.-W., and Banerjee, D.
Microwave and Optical Technology Letters, 53(12), pp. 2721 - 2724, 2011
LINK
3 Modeling and simulation of capillary microfluidic networks based on electrical analogies
Kang, S.-W. and Banerjee, D.
ASME Journal of Fluids Engineering, 133(5), pp. 054502 - 1 - 6, 2011
LINK
2 Point-mass model for nano-patterning using dip-pen nanolithography (DPN)
Kang, S.-W. and Banerjee, D.
Sensors & Transducers Journal, 11(Special Issue), pp. 64 - 73, 2011
LINK
1 Nanopatterning of catalyst by dip pen nanolithography (DPN) for synthesis of carbon nanotubes (CNT)
Kang, S.-W., Banerjee, D., Kaul, A.B., and Megerian, K.G.
Scanning: The Journal of Scanning Probe Microscopies, 31(1), pp. 42 - 48, 2010
LINK
게시물 검색